7 Useful Bandsaw Resawing Tips

A band saw is popular wood-working tool people use to cut different types of wood comfortably. The process of cutting the boards into thinner pieces using a band saw is known as bandsaw resawing. This is a modern technique for woodworkers that they use for straight cut, long rip cut and curved cuts as well.

But the process is quite difficult and people often damage the working materials. To learn effortless cutting, a lots of hard work and practice is required.A band saw provides much efficient cutting than a table saw.But understanding the band saw using technique is essential before you start using a bandsaw for resawing. If you are a woodworker, you might know no other machine can provide such efficient cutting to produce wide panels from narrow boards, thin sheets of veneer and thin wood pieces for bent laminations.With the passes of time a lots of band saw resawing technique invented by experts. Knowing the bandsaw resawing techniques will help you to get perfect size and shape woods for your woodworking activities. We listed some popular bandsaw resawing tips here to help you learning and implementing on your regular woodworking activity.

7 Exclusive Bandsaw Resawing Tips for Beginners

To learn proper band saw operating lots of hard work and practice required. Enough patience of practicing the band saw operating can help you become a good woodworker effectively. Proper knowledge and awareness will help you to work risk-free. To avoid any kind of injury and resawing your woods, you have to follow below tips carefully.

• Understand the Resawing Capacity:

Before you start working with your band saw you need to know about your band saw capacity properly. Good knowledge about your band saw will help you to resaw the board accurately. Band saw capacity is measured in horsepower. Depending on the board type you need to a high or low volume horsepower machine. The more the horsepower is, your machine will perform quick or slow. A modern band saw can increase its resawing capacity from 6 to 12 inches. By reading the user manual, you will know if your band saw has a riser block kit or not. You must read the manual and keep good knowledge on your band saw resawing capacity.

• Blade Selection of Resawing:

This is really important to identify the best blade when it comes to best resawing. Using a low tension blade ensures some great benefit on the band saw resawing. Low tension tight blades provide more horsepower on duty that ensures an efficient cut of your board.  The thinner kerf ensures less damage to your wood and provides very thin cutting of any hardboard. When you are selecting a blade for resawing, you should ensure the tooth count. According to experts, 3 to 4 tooth provides a superior cut effectively.

• Set Proper Angle of Blade Saw Fence:

This is the most crucial thing most of the new woodworker make mistake. If you cannot set the proper angle of the fence, it will damage your board. Experts always advise using pencil marks to ensure proper angling of a band saw fence. You can also use the boxing method to ensure the proper angle of your board. This will help you to ensure an effortless cut of your boards. Depending on board type you might need to change the angle of the fence. But don’t resaw without proper fencing, especially when you are a beginner at bend saw resawing.

• Box in Long Boards:

Resawing a longboard is more sensitive than a short board piece. Because you are creating a thin piece from a longboard. A little unconsciousness can damage your wood piece and ruin all of your hard work. The method of using a box holds the board snugly and helps in perfect cutting. Set the box in front of the fence so it can clamp the board and helps in easy sliding. This helps to set the wood board comfortably and concentrate on quality cutting. So, you can use the boxing method to for good quality resawing.

• Square the Board and Blade:

You can adjust the blade height and width for comfortable cutting. Using the manufacturer guide square the blade and board. This will supply proper force for cutting the board. If you use a long blade for cutting short wood pieces, it might be bend on high pressure. But the same height of the blade does not bend on cutting. Bending the blade can cause serious injury and provide low-quality resawing as well. So, set up the fence properly to avoid risks on your resawing.

• Use a Push Pad:

As resawing produce a wide panel from narrow boards, thin sheets of veneer and thin wood pieces, so your hand is very close to the blade. Blade bending can cause injury on your hand. Using a push pad is a clever way to avoid injury on the band saw resawing. You will find various types of push pad available in the market. Use a push pad to push the board towards the fence. This will help you to concentrate on cutting and get thinner possible boards effectively.

• Cut the Out Board Side:

Cutting the outer side of the board is much comfortable and easy to cut. Because of the outer side, you can see clearly and hold with the push pad snugly. For comfortable holding and clear view, you can produce thinner pieces from any longboards. This is the reason experts always suggest to cut the outboard side first. The process is effortless and takes less time to cut. Also, the outer side has enough space and light that impact on a proper band saw resawing.

Final Words:

Proper band saw resawing needs lots of practice and hard work. If you are newbie, you should follow the above-mentioned techniques on your band saw resawing. This will help you to learn and proper resawing on your woodwork. All the tips we listed here is effortless and easy to learn.

Related Articles :

• 18 Useful Circular Saw Safety Tips
• Our Top 6 Table Saw Under 1000 Dollars [Latest Picks]
• 14-inch bandsaw reviews